聚乙烯防腐涂層沖擊試驗機-導管式

CLC-E

一、聚乙烯防腐涂層沖擊試驗機滿足標準：

SY0315-2005T 鋼質管道單層熔結環(huán)氧粉末外涂層技術規(guī)范

GB/T 23257-2009 埋地鋼質管道聚乙烯防腐層-附錄K

二、聚乙烯防腐涂層沖擊試驗機產品概述：

本設備主要應用于一定質量的錘頭升到的高度后，垂直下落至被測試品后，檢測對樣品的破壞程度。

本設備通過無限遙控控制交流電機的啟動可以控制錘頭高度的升降，通過遙控開關來控制對錘頭的吸附和釋放。通過限位開關控制錘頭升降的高低。

錘頭通過導管自由下落，本儀器操作簡單，使用方便。

三、聚乙烯防腐涂層沖擊試驗機技術指標：

1. 有效沖擊高度：1500MM
2. 錘頭重量：2000g±2g,1000g±2g
3. 錘頭直徑徑：Φ25MM ，Φ16MM
4. 錘頭材質：淬火鋼制錘頭
5. 基座重量：≥40KG
6. 遙控錘頭自動升降
7. 遙控自動掛錘和釋放錘頭
8. zui大試樣尺寸：直徑300NN
9. 設備尺寸：長*寬*高-900*600*2200（MM）
10. 設備重量：100KG

四、聚乙烯防腐涂層沖擊試驗機標準配置：

1. 主  機  一臺
2. 測控箱  一臺
3. 錘  頭  兩把
4. 試樣支座  一個
5. 鋼板尺 一個
6. 高度限位開關 一個
7. 電 機 一臺
8. 遙控鑰匙 二把
9. 水平泡 二個

英文簡介如下：

Polyethylene anticorrosion coating impact test machine - catheter

CLC-E

==================================================

A, polyethylene anticorrosive coating impact test machine to meet the standard:

SY0315-2005T steel pipeline fusion bonded epoxy powder coating technical specification

GB/T 23257-2009 polyethylene coating for buried steel pipeline - appendix K

=================================================

Two, polyethylene anticorrosive coating impact test machine product overview:

This equipment is mainly used to hammer quality up to a specified height, vertical drop to the tested product, the extent of damage detection of samples.

This equipment by unlimited remote control AC motor starting can control the hammer height fluctuation, through the remote control switch to control the adsorption and release of the hammer. The limit switch control hammer lifting height.

Hammer through the catheter free fall, the instrument has the advantages of simple operation, easy to use.

====================================

Technical indicators three, polyethylene anticorrosive coating impact test machine:

1, the effective impact height: 1500MM

2, hammer weight: 2000g ± 2G, 1000g ± 2G

3, hammer diameter: Phi 25MM, Phi 16MM

4, hammer material: quenching steel hammer

5, the base weight: ≥ 40KG

6 hammer, remote automatic lifting

7, remote control automatic hammer hanging and release the hammer

8, the maximum sample size: 300NN diameter

9, the size of the equipment: length * width * height -900*600*2200 (MM)

10, the weight of equipment: 100KG

===================================

Four, polyethylene anticorrosive coating impact test machine standard:

1, the main machine

2, control box

3, hammer head tw

4, a specimen holder

5, a steel ruler

6, the height limit switch a

7, the electric machine

8, the remote control key two

9, a level bubble two